ECHO REPEATER – (Part #ABPER-5)
» MSRP $85
» Telescoping dipole antenna included
» Velcro strips for mounting included
» Power cord sold separately

FUNCTIONAL DISPLAY MONITOR KIT – (Part #FDK)
» MSRP $95
» Scrolls through 10 wheel locations, lighting each location for 4 seconds
» Displays pressure readouts for each wheel location that lights.
» Two locations preset with low pressures to trigger beeping alert
» First alert at 12.5% / 2nd alert at 25%
» Beeping can be switched on/off
» AC/DC Wall Plug in kit (#AAPACDC) & 3.5” antenna included

EMBEDDED MONITOR BOARD – (Part # EBR34)
» MSRP $55
» Board can be embedded in other products to accept sensor signals for display.

SENSOR - (Part # APS1)
» MSRP $50 each
» Reads pressures from 10 – 199 psi
» Weight - .6 oz (19 grams)

INDUSTRIAL SENSOR - (Part #APS1-IND)
» MSRP $95 each
» Reads 10 – 199 psi
» Weight - .6 oz (19 grams)
» For use with large bore industrial valve stems
» Robust electronics for industrial applications with a robust
» Case made with GE industrial plastics.

CABLED ANTENNA KIT - (Part #ABPCA)
» MSRP $50
» For use with monopole monitor only
» 35 ft coax cable – one end attaches to monitor and
other end attaches to 7.5 inch whip antenna (included)

FIXED END POWER CORD - (Part #AAPC1)
» MSRP $11
» Connects monitor to 12-volt power outlet
» 8 ft cord

STRIPPED END POWER CORD – (Part#AAPC3)
» MSRP $9
» Hard wired to a power source
» 8 ft cord

24/12Volt FIXED END POWER CORD - Part #AAPC5
» MSRP $12
» Connects monitor to 24-volt power outlet
» Converts power from 24-volt to 12-volt
» 8 ft cord

AC/DC WALL PLUG-IN KIT - (Part #AAPACDC)
» MSRP $17.50
(Converts 110-volt AC to 12-volt DC) » Kit includes power cord and AC/DC converter
» Power cord connects converter to all monitors and repeater
» Converter plugs into standard 110 outlet
» For use in vehicles that do not have a 12-volt power source
» 8 ft cord
» Not for use with other devices

RS232 FIXED END POWER CORD – (Part #AAPC7)
» MSRP $20
» Connects to 12-volt power outlet
» Includes RS232 data downloading capability
» 8 ft cord

VISOR CLIP/SUCTION CUPS – (Part #AAPVC)
» MSRP $10
» 2 clips per set
» Fits onto monitor from top or bottom for installation onto visor or window

SENSOR LOCK KIT – Part # Lock Nut Kit (LNK)
» MSRP $10.95
» Includes key ring wrench and nuts for 6 wheel positions.

MONOPOLE ANTENNA – 3.5 INCH - (Part #ABPPMA)
» MSRP $10

RAM MOUNT – (for mounting Monitor) – (Part #AAP11)
» MSRP $35
» Ram Mount with 2.5” arm and 2 knuckle end plates.
» Allows for direct mounting to vehicle
» Screws allow adjustment of mount at both top and bottom
» Total length and weight: 4” and 6.6 oz.
(Stem is 2.5” with weight of 2.8 oz. Round plates with knuckle ball adds 1.75” to top and bottom.)

RAM MOUNT SUCTION CUP ATTACHMENT – (Part #AAP12)
» MSRP $20
» Suction cup attachment attaches to windows, metal dashes
(non-porous surfaces)
» Power suction lever insures secure fastening
» Total length and weight: 3.6 oz and 3.25”

RAM MOUNT MOUNTING PAD – (Part #AAP13)
» MSRP $5.50
» 2.43” Diameter double stick mounting pad
» Will stick to all non-porous surfaces

RAM MOUNT/SUCTION CUP COMBO – (Part #AAP14)
» MSRP $50
» Ram Mount and Suction Cup Combination
» Comes with suction cup attached at one end and a regular round mount plate on the other.